PTCL ROUTER PORT FORWARDING

Hello Fellas. I am going to teach you ptcl router port forwarding for open your port :)

 

1. Open your browser and rite 192.168.1.1 and give user name admin and password also admin if you changed your router user name password then give the changed user and password :)
   
    
2. Now after acces you see this one 
   
    
3. Now click to Advance setup
   
4. Now click on NAT and you see my dorkcomet rat port is open :)
   
5. Now click on virtual servers and lets start to creating port forwarding click on ADD after that you see this page :)
   
   now your port forwarding page is open so let me guide you click on CUSTOM SERVER and write here name which you want forward a port for example you want to forward for rat you can write here dorkcomet if you use dorkcomet rat then go to server ip you should write you server ip 192.168.1. for example your ip is 192.168.1.10 then write there 192.168.1.10 ok so now let see on the external port start and externel port end you give the port of rat which you used if your rat has 1604 port then write there 1604 on ecternal port start and to end and give it also same port in internal port start to end :) and go to protocol click on tcp/udp "after that see this pic" 
   
   NOW SAVE/APPLY  your port forwarding is start now see this pic :)
   
   NOW YOU CAN CHECK YOUR PORT OPEN CLICK THIS SITE http://www.canyouseeme.org/ And give your port 1604 then click on check port
    TAKE CARE FRIENDS :)